OP IT Line Interactive UPS 800Va
51,513 Fr
OVERVIEW
| UPC Code |
037332213969 |
| UPS Type |
Line-Interactive |
INPUT
| Input Phase |
Single-Phase |
| Rated input current (Maximum Load) |
10A |
| Nominal Input Voltage(s) Supported |
120V AC |
| UPS Input Connection Type |
5-15P |
| Input Circuit Breakers |
10A |
| UPS Input Cord Length (ft.) |
5 |
| Recommended Electrical Service |
15A 120V |
OUTPUT
| Output Capacity (VA) |
800 |
| Output Capacity (kVA) |
0.8 |
| Output Capacity (Watts) |
475 |
| Output Capacity (kW) |
0.475 |
| Output Capacity Details |
6.7A @ 120V. (LINE MODE) 110%±10%,GOES TO FAULT AFTER 5MIN; 120%±10%,GOES TO FAULT IMMEDIATELY; (BATTERY MODE) 110%±10%,SHUTS DOWN IN 5 SEC; 120%±10%, SHUTS DOWN IMMEDIATELY |
| Power Factor |
0.6 |
| Nominal Voltage Details |
120V sinusoidal in line mode and 120V PWM in battery mode |
| Frequency Compatibility |
50 / 60 Hz |
| Frequency Compatibility Details |
Output is regulated to +/-0.05Hz when input frequency exceeds +/-5Hz of nominal. |
| Output Voltage Regulation (Line Mode) |
120V (+6%/-12%) |
| Output Voltage Regulation (Battery Mode) |
120V (±10%) |
| UPS Output Receptacles (Surge Suppression Only) |
6 UPS outlets, 2 surge-only outlets |
| Output AC Waveform (AC Mode) |
Pure sine wave |
| Output AC Waveform (Battery Mode) |
PWM sine wave |
| Nominal Output Voltage(s) Supported |
110V; 115V; 120V |
| Output Receptacles |
(8) 5-15R |
BATTERY
| Battery Type |
Valve Regulated Lead Acid (VRLA) |
| Runtime Full Load (min.) |
3 min. (475W) |
| Runtime Half Load (min.) |
16.5 min. (238W) |
| DC System Voltage (VDC) |
12 |
| Battery Recharge Rate (Included Batteries) |
8 hours (10% to 90%) |
| Battery Access |
Battery access door |
| Battery Replacement Description |
Replaceable internal batteries (see manual) |
Compare
